工業涂裝流水線噴涂，是一般水性涂料適用的一種噴涂工藝，但與刷涂相比較，其流變問題更為突出?？蛇m當利用增稠劑調整改善流變性，進行稀釋以提高噴涂效率，實際施工若發現稀釋過程中流變性質變化過大，這與水性涂料本身屬于非溶液體系有關。

Industrial coating assembly line spraying is a spraying process suitable for general water-based coatings, but compared to brushing, its rheological problems are more prominent. Thickening agents can be appropriately used to adjust and improve the rheological properties, and dilution can be carried out to improve spraying efficiency. In actual construction, if it is found that the rheological properties change too much during the dilution process, it is related to the fact that water-based coatings belong to non solution systems.

工業涂裝流水線水性涂料涂膜干燥較慢，但在噴涂過程中卻相反，在噴槍口附近涂料會出現干燥和凝聚，并堆積起來而形成堵塞。若涂料噴涂離開噴愴口干燥快，到達工件表面后很難形成連續的涂膜。

The drying of water-based coatings on industrial coating assembly lines is slower, but the opposite is true during the spraying process. The coatings will dry and condense near the nozzle, and accumulate to form blockages. If the paint spraying leaves the spray nozzle and dries quickly, it is difficult to form a continuous coating film after reaching the surface of the workpiece.

工業涂裝流水線噴涂過程中的霧化也很重要，霧化的好壞將直接影響到涂膜與涂裝的實際成效。這一點能通過改善噴涂某些方面性能，如提高噴涂能力、平滑涂層、適應高黏度涂料，減少?lài)娡繒r(shí)間和霧化損失以提高材料的利用率。

The atomization in the spraying process of industrial coating assembly lines is also important, and the quality of atomization will directly affect the actual effectiveness of the coating film and coating. This can be achieved by improving certain aspects of spraying performance, such as enhancing spraying ability, smoothing coatings, adapting to high viscosity coatings, reducing spraying time and atomization losses, in order to improve material utilization.

工業涂裝流水線的工藝需要根據具體的工件形狀、結構等來進行，通過實際的噴涂使用來進行驗證，只有滿足實際涂層與效率要求的涂裝，才能在工業生產中被良好應用。斯普瑞涂裝，以良好的設備基礎助力每一位客戶的噴涂所需，歡迎來電咨詢!

The process of industrial coating assembly line needs to be based on the specific shape and structure of the workpiece, and verified through actual spraying use. Only coatings that meet the requirements of actual coating and efficiency can be well applied in industrial production. Sprite Coating, with a good equipment foundation, helps every customer's spraying needs. Welcome to call for consultation!

上一篇：涂裝生產流水線構造組成介紹
下一篇：車間焊接煙塵除塵器的選擇要注意什么？