機器人涂裝線又稱機器人涂裝線。可分為手動機器人涂裝線和鏈條自動機器人涂裝線, 適合多規格線路板的插件工序。單邊、雙邊插件變頻無級調速電機、電子調速電機等；運行方式可分強制和自由節。

　　Robot coating line, also known as robot coating line. It can be divided into manual robot coating line and chain automatic robot coating line, suitable for the plug-in process of multi specification circuit boards. Unilateral and bilateral plug-in variable frequency stepless speed control motors, electronic speed control motors, etc; The operation mode can be divided into forced and free sections.

　　生產線機器人涂裝線的組合及配置可任意變化，每臺機長為3M，2.4M兩種可隨時變更，組成及配置，機器人涂裝線速度可用變速旋鈕調整所需輸送速度，寬度可與電路板寬度隨時高速，機身由鋁合金構成，操作搖桿可輕易調整插件寬度30-320mm，基板與機器人涂裝線接觸面只有2.5mm。

　　The combination and configuration of the robot coating line on the production line can be changed arbitrarily. Each machine has a length of 3M and 2.4M, which can be changed at any time. The composition and configuration of the robot coating line can be adjusted with a variable speed knob to adjust the required conveying speed. The width can be adjusted at any time with the width of the circuit board. The body is made of aluminum alloy, and the plug-in width can be easily adjusted by operating the joystick to 30-320mm. The contact surface between the substrate and the robot coating line is only 2.5mm.

　　產品特點:

　　Product features:

　　1，手推機器人涂裝線采用鋁型材導軌作為輸送介質，所以該線體摩擦力小,無噪音,也無需加任何潤滑油,對所輸送的印制板無任何污染。

　　1. The painting line of the hand pushed robot uses aluminum profile guide rails as the conveying medium, so the friction force of the line body is small, there is no noise, and no lubricating oil is needed, which does not pollute the printed circuit board being transported.

　　2，線體由若干個標準型2米單元組成。每個單元為相對獨立的整體，工作高度720~760可調，照明采用30W直管熒光燈（燈管為飛利浦）。

　　2. The line body is composed of several standard 2-meter units. Each unit is a relatively independent whole, with an adjustable working height of 720-760. The lighting adopts 30W straight tube fluorescent lamps (with Philips tubes).

　　3，線體結構設計美觀大方，機架采用模具生產，一致性好，矩形管、板材選用優質標準材料，采用噴塑工藝。整條線充分體現現代電子廠自動化生產特征。

　　3. The design of the wire structure is beautiful and generous, and the frame is produced using molds with good consistency. High quality standard materials are used for rectangular tubes and plates, and spray molding technology is adopted. The entire line fully embodies the characteristics of modern electronic factory automation production.

　　4，機器人涂裝線配合基板輸入機后能同本公司生產的各型號爪式波峰焊接機聯機使用。從而組成一條自動化涂裝焊接生產線系統。

　　4. The robot coating line, in conjunction with the substrate input machine, can be used online with various models of claw wave soldering machines produced by our company. Thus forming an automated painting and welding production line system.

　　·技術參數

　　·Technical parameters

　　1.機 架：采用40×40×1.5mm矩型鋼管組焊制作，支腳配可調腳杯。

　　1. Rack: Made of 40 × 40 × 1.5mm rectangular steel pipes welded together, with adjustable foot cups for support legs.

　　2.臺 板：采用δ=15mm的木夾板，面鋪湖蘭色防火板，T型膠條包邊，寬B=1200mm。

　　2. Bedboard: Made of wood splints with a width of δ=15mm, covered with a lake blue fireproof board, T-shaped rubber strips wrapped around the edges, with a width of B=1200mm.

　　3.導 軌：采用手推機器人涂裝線專用鋁滑軌，導軌間距0-350mm可調，雙邊布置。

　　3. Guide rail: It adopts a hand pushed robot coating line dedicated aluminum slide rail, with adjustable guide rail spacing of 0-350mm and arranged on both sides.

　　4.照 明：燈架采用40×40×1.5mm矩型管制作，配40W日光燈管，雙邊布置。

　　4. Lighting: The lamp holder is made of 40 × 40 × 1.5mm rectangular tubes, equipped with 40W fluorescent tubes, arranged on both sides.

　　5.工藝卡：在燈架中間設一路工藝指導卡架，采用H型鋁導軌制作，每工位布置一塊300×400×1.5mm透明有機玻璃板。

　　5. Process card: Install a process guidance card holder in the middle of the lamp frame, made of H-shaped aluminum guide rails, and arrange a transparent organic glass plate of 300 × 400 × 1.5mm at each workstation.

　　6.元件盒掛條：在燈架下兩邊設兩路元件盒掛條，選用30×30mm的角鋼制作。

　　6. Component box hanging strips: Two component box hanging strips are installed on both sides under the lamp frame, made of 30 × 30mm angle steel.

　　7.機體顏色：機身表面采用電腦白色噴塑或客戶自定顏色

　　7. Body color: The surface of the body is made of computer white spray paint or a color customized by the customer

　　本文由  機器人涂裝線   友情奉獻.更多有關的知識請點擊 http://computerguide.cn真誠的態度.為您提供為全面的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

　　This article is a friendly contribution from the robot painting line. For more related knowledge, please click http://computerguide.cn Sincere attitude. We will provide you with comprehensive service. We will gradually contribute more relevant knowledge to everyone. Stay tuned

上一篇：自動式拋丸機在日常工作中如何使用？
下一篇：多工位焊接煙塵凈化系統的使用