噴粉線又叫噴粉設備、粉末噴涂設備，它具有很多優勢，例如粉末噴涂經濟性好，無環境污染，效率高，一次噴涂可使涂層厚度達到50μm（微米）以上。

Powder spraying line, also known as powder spraying equipment or powder spraying equipment, has many advantages, such as good economic efficiency, no environmental pollution, high efficiency, and the ability to achieve a coating thickness of over 50 μ m (micrometers) in one spray.

噴粉線設備主要包括粉末噴涂室、高壓靜電發生器、靜電粉末噴槍、送粉器、粉末回收裝置等。

The powder spraying line equipment mainly includes powder spraying room, high-voltage electrostatic generator, electrostatic powder spray gun, powder feeder, powder recovery device, etc.

▲噴粉線設備

▲ Powder spraying line equipment

噴粉線設備的七大組成部分主要包括：

The seven major components of the powder spraying line equipment mainly include:

預處理設備(表面預處理)、噴粉系統（粉末噴涂）、懸掛輸送鏈、噴粉流水線、烘箱、熱源系統、電控系統等。

Pre treatment equipment (surface pre-treatment), powder spraying system (powder spraying), suspended conveyor chain, powder spraying assembly line, oven, heat source system, electrical control system, etc.

1、粉末是噴粉線設備的原涂料。噴出的剩余粉末落到噴粉房底部再次篩選回收，噴粉房底部的粉末自動掃入供粉桶里，供粉桶中的粉末由送粉系統送至粉末篩分機，然后送粉桶回收，不浪費粉末。

1. Powder is the original coating of the powder spraying line equipment. The remaining powder sprayed falls to the bottom of the powder spraying room for further screening and recycling. The powder at the bottom of the powder spraying room is automatically swept into the powder supply bucket. The powder in the powder supply bucket is sent to the powder screening machine by the powder feeding system, and then sent to the powder bucket for recycling, without wasting powder.

2、噴粉線設備根據設計要求，每側配備4支自動噴粉槍。機械手可以根據工件的復雜情況調整垂直速度和出粉的大小，并根據工件的大小調整機械手的升降尺寸。確保粉末噴涂質量要求。

2. According to the design requirements, the powder spraying line equipment is equipped with 4 automatic powder spraying guns on each side. The robotic arm can adjust the vertical speed and powder output size according to the complexity of the workpiece, and adjust the lifting size of the robotic arm according to the size of the workpiece. Ensure the quality requirements for powder coating.

3、使用噴粉流水線設備這種涂裝方法相對于噴漆來講更加綠色低碳環保，使整個噴粉流水線干凈整潔無異味，沒有任何的油漆味兒；深圳鑫凱勝是一家粉末噴涂設備廠家，以生產環保型設備為主，因此更容易獲取環評手續。

3. The use of powder coating assembly line equipment is a more green, low-carbon and environmentally friendly coating method compared to spray painting, making the entire powder coating assembly line clean, tidy and odorless, without any paint smell; Shenzhen Xinkai Sheng is a powder coating equipment manufacturer that mainly produces environmentally friendly equipment, making it easier to obtain environmental impact assessment procedures.

▲鋁型材噴粉設備

Aluminum profile powder spraying equipment

4、噴粉流水線可以采用全自動模式，配合機械手實現自動粉末噴涂，大大提升了工作效率，對量大的產品工件具有明顯的優勢。

4. The powder spraying assembly line can adopt a fully automatic mode, combined with a robotic arm to achieve automatic powder spraying, greatly improving work efficiency and having obvious advantages for large quantities of product workpieces.

5、粉末噴涂后的漆膜質量，包括涂層的光潔度、附著力，均得到較大提高，所以噴粉設備在現代的應用范圍很廣泛。

5. The quality of the paint film after powder spraying, including the smoothness and adhesion of the coating, has been greatly improved, so powder spraying equipment is widely used in modern applications.

上一篇：車間整體除塵設備：脈沖布袋除塵器儀表的檢測和控制內容
下一篇：VOCs活性炭吸附箱的燃爆原因